Lift Emergency Telephone - 2G LIFT DIALER METAL BOX - Digicom
  • Lift Emergency Telephone - 2G LIFT DIALER METAL BOX - Digicom

Lift Emergency Telephone - 2G LIFT DIALER METAL BOX - Digicom

Digicom
Reference: 8D5798

The 2G LIFT DIALER METAL BOX emergency telephone is a remote alarm system for lifts with built-in GSM module and with the management of the fixed telephone line (PSTN).


2G LIFT DIALER is the central unit that can be installed in the upper part of the lift compartment or on the cabin roof or on the wall (first make sure that there is a good GSM signal).


The remote alarm system is composed by the central unit and by VoiceBox speakerphone terminals for the communication.

The vocal unit VoiceBox is equipped with speakers, microphone and 2 leds that signal the various phases of the call as required by EN81-28 regulation.


The main feature of Digicom’s system is the VoiceBox management with 2 wires only in autopowered mode.


This feature allow a quick installation and it doesn’t require any other cabling.


In case of out of order conditions or blocks of the lift, the people trapped can activate

the call to the Service Center by simply pressing the button in the Car.


2G Lift Dialer Metal Box will generate an identification through the DTMF protocol

for the correct management by the Service Center.

Thanks to the implementation of ADEMCO protocol (as an alternative to the proprietary one)


2G Lift Dialer Metal Box can be easily integrated in the exhisting softwares for the call management. Then it is possible to establish a bidirectional audio communication for the alarm management.

SUMMARY OF THE FEATURES YOU WILL LOVE OF THIS TELEALARM SYSTEM

  • Integrated GSM / GPRS module
  • Connection to VoiceBOX with only 2 wires
  • Configuration via SMS / remote via DTMF tones / Android APP
  • SMS command to check configuration, GSM signal and battery status
  • Built-in rechargeable backup battery
  • Intercom between machine room and cabin
  • ID generation with DTMF protocol
  • Quadrifonia management
 

Safety Payments

 

Delivery

 

Return Policies

GSM/GPRS MODULE


• Quad-Band 850/900/1800/1900 MHz
• GSM Module: GPRS/GSM Class 10
• GPRS: Multi-slot Class 10


OUTPUT POWER


• Class 4 (2W) in GSM at 850/900MHz
• Class 1 (1W) in DCS at 1900/1800MHz
• Plug-in SIM card (1,8V - 3V compliant)


INTERFACES


• 1 Interface 2 wires for VoiceBox “BUS”
• 1 FXS Interface for Service/Configuration phone
• Removable screw terminal board
• 1 RS232 serial port (on RJ45) for Frame Controller Telemetry
• 1 Guest USB port for local upgrade


INPUTS AND OUTPUTS


• 1 Filter input
• 1 Technical alarm input
• 1 Relay output (n.c. /n.a) that can be activated by Tones or SMS
POWER SUPPLY
• Input: at +12 ÷ 24 VDC. / 1A minimum
• Li-Ion 3.7V Backup battery (included)
• Max consumption ~ 12W


GSM ANTENNA


• SMA connector for external antenna
• Impedance: 50 ohm



• DIN rail mounting kit included
• GSM antenna with 3 meters cable
• Size: 170 x 145 x 65 mm
• CE Mark and Rohs compliant


Note: CONNECTION CABLES
For the best performances of the product use 6/10 mm twisted pair (better
9/10 mm) between 2G Lift Dialer Metal Box and VoiceBox.

Data sheet

Input power
+12 ÷ 24 VDC. / 1A minimum
GSM/GPRS
GSM Quad-Band 850/900/1800/1900 MHz
Consumption
max 12 W
Dimensions
170x145x75 mm

Download

Create your account now!