Brake Control Device for Lifts and Elevators
Reference: NCRS02-10MT
Ideal product for elevators
The Brake Control Device has been designed to be installed on electric lifts equipped with a machine room and speed regulator (VVVF).
The device allows you to check the correct operation of the braking unit by means of:
1) two proximity sensors (which individually check the opening and closing of the “brake chucks”)
2) checking for the presence of voltage on the contactor that powers the brake electromagnet (e.g. the running contactor).
In case of failure, the device activates and stops the operation of the lift at the latest when the car reaches the destination floor. The operation of the device (and the elevator) should only be reset manually by qualified staff.
The kit contains:
• 1 BCD device
• 1 24 VDC power supply unit
• 2 proximity sensors + 10mt cables
• 1 fixing bracket kit for sensors
MADE IN ITALY
COMPLIANT TO THE REFERENCE STANDARDS:
UN10411-1:2021
EN21015:2014 EMC - EN21016:2103 EMC
HD60364-4-41:2017 - EN60204:2018
ELECTRIC DATA
- 24 VDC device power supply
- Device absorption 16 A
- NC contact break 3 A - 250 VDC
- DC contactor coil power supply from 24 to 110 VDC optoisolated
- AC supply contactor coil from 110 to 230 VAC optoisolated
Check that the brackets for fixing the sensors in the kit are suitable for the use on the braking unit on which the device is to be installed. Otherwise provide locally.
2022-02-01
You might also like
Create your account now!
Back to Top