External Presence Sensor LED Driver
Reference: HEC9025
Product ideal for elevator operators
Tri-dimming LED Version
Compact flat sensor antenna, with cable back entry.
Device consisting of LED driver and motion sensor. It is suitable for all LED sources drived in constant current.
Through the DIP switch you can set the output current.
This LED driver mantains a constant and adequate light inside the cabin also when the people is inside or the lift shutdown.
An external sensor switch on the lamp to 100% when the elevator is running and detects people presence; when it is stationary and it detects no presences the flow drops to 10% - 20% - 30% - 50% according to the setting set.
Ideal product for elevators
DATASHEET
- Voltage: 220- 240 V - 50/60 Hz
- Input current: 0.15
- Input power: 31W
- Warming-up time: 20 s
- Microwave frequency: 5.8GHz +/- 75MHz
- Transmission power: <0,2 mW
- Detection range: Max. ( Øx H) 12m x 6m
- Detection angle: 30° ~ 150°
- Sensitivity: Sensor OFF / 50% / 75% / 100%
- Hold time: 5s ~ 30min (selectable)
- Daylight threshold: 2 ~ 50 lux, disabled
- Stand by period: 0s ~ 1h, + (selectable)
- Stand by dimming period: 10% / 20% / 30% / 50%
- Empty load voltage: 55V
- Power factor: >0.9
- Output current: 350/500/550/700/750/900mA
- Operation temperature: Ta: -20°C ~ +50°C
- IP rating: IP20
- Certificates: Semko, CB, EMC, CE, R&TTE,SAA
Data sheet
- Detection Angle
- 30°~150°
- Detection Range
- max Ø 12x6 m
- Current
- 0,15-0,14 A
- Output Current
- from 350 to 900 mA
- Dimensions
- 119,5x53x25 mm
- Efficiency
- 85% (max)
- Power Factor
- >0,90 C
- Microwave Frequency
- 5,8 GHz +/- 75 MHz
- IP rating
- IP20
- Power
- 31 W
- Trasmission Power
- <0,2mW
- Daylight Threshold
- 2 ~ 50 lux
- Ambient Temperature Ta
- -20 ÷ +50 °C
- Hold Time
- 5s ~ 30min
- Warming up Time
- 20 s
- Voltage
- 220-240 V - 50/60 Hz
- Empty load voltage
- 55 V
- Sensor Type
- Presence
Create your account now!
Back to Top