Presence Sensor ON/OFF
Reference: HC005S
Ideal product for elevators
This sensor is a motion switch, which turns on the light on detection of people movement and turns off after a preselected hold-time when there is no people around.
Designed in the software, sensor switches on/off the load right at the zero-cross point, to ensure the inrush current is minimised, enabling the maximum lifetime of the relay.
Detection area can be reduced by selecting the combination on the DIP switches to fit precisely for each specific application.
Hold-time means the time period you would like to keep the lamp on 100% after the person has left the detection area.
Ideal product for elevators
DATASHEET
- Voltage: 220- 240 V - 50/60 Hz
- Stand-by power: <0,5 W
- Load ratings: 400 VA (Capacitive) - 800W (Resistive)
- Warming-up time: 20 s
- Microwave frequency: 5.8GHz +/- 75MHz
- Transmission power: <0,2 mW
- Detection range: Max. ( Øx H) 12m x 6m
- Detection angle: 30° ~ 150°
- Sensitivity: 10% / 30% / 50% / 75%/ 100%
- Hold time: 5s ~ 30min
- Daylight threshold: 2 ~ 50 lux
- Operation temperature: Ta: -35°C ~ +70°C
- IP rating: IP20
- Mounting height: max. 6 m
- Certificates: Semko, CB, EMC, CE, R&TTE,SAA
Data sheet
- Detection Angle
- 30°~150°
- Detection Range
- max Ø 12x6 m
- Dimensions
- 80,5x36,5x26 mm
- Microwave Frequency
- 5,8 GHz +/- 75 MHz
- IP rating
- IP20
- Stand-by Power
- <0,5 W
- Trasmission Power
- <0,2mW
- Daylight Threshold
- 2 ~ 50 lux
- Ambient Temperature Ta
- -35 ÷ +70 °C
- Hold Time
- 5s ~ 30min
- Warming up Time
- 20 s
- Voltage
- 220-240 V - 50/60 Hz
- Sensor Type
- Presence
- Load Ratings
- 400 VA (capacitive) - 800 W (resistive)
Create your account now!
Back to Top